Instructions for SWINGEAT LUXURY

Before use, please read thoroughly the instructions for use and the general safety instructions!

Instructions for use for SWINGEAT LUXURY

Materials used and maintenance

The garden seating is made of materials that are intended for outdoor use, i.e. except in winter the furniture can be placed outdoors (for winter maintenance see below). The shade is made of synthetic impregnated fabric with UV stabilizers. It is not recommended to machinewash the shade, only wipe with dump cloth. The wooden parts are made of coniferous tree woods and they are treated with protective scumble varnish IMPRANAL PROFI (golden oak hue) in three layers. The metal construction is treated with ourdoor powder paint. Please use dump cloth to clean both the wooden and the metal parts. If when swinging you hear a noise from the parts where the movement mechanism is located or the movement is no longer as smooth as before, please clean the parts of seating where the mechanism is located. When cleaning, the garden seating must be locked for movement.

 

Preparation for winter:

Before the temperatures drop below zero, choose a nice dry day to prepare the garden furniture for winter. First remove the shade. Undo the screws located underneath on both ends of the central pole. Then pull out both bars the shade is streched on. Remove the bars and keep the dry textile shade in a dry place. Cover the whole product with a waterproof sheet and fix it carefully.

Do not cover the product unless it is completely dry.

If you can keep the garden seating inside in a dry place, do so. This way you can prolong the product’s life. The garden furniture can be dismantled, but please follow this procedure. Remove the shade following the above mentioned instructions. Then loosen the nuts holding the shade construction and remove it. Next unscrew the wooden parts of the table, seats and backrests. Screws are screwed from below. Pull towards yourself and remove the side plastic covers secured with plastic rivets. Take down the upper part of the metal construction from the lower construction. The upper construction needs to be slightly tilted and moved sideways. Loosen the nut and remove the screws connecting the right and the left part of the upper metal construction and separate its parts. Place the individual parts of the garden seating in a dry place for the winter season.

General safety instructions:

The garden swinging seating is intended for slight relaxing swinging; the recommended swing to both sides is approx. 20 cm. The product is equipped with a stop limiting its movement; however, we strongly discourage the movement where you hit the stop because the objects placed on the table may fall down. Please do not put your hands, feet or any other parts of your body close to the movement mechanism. The product is neither a toy nor playground equipment. Children are not allowed to use the product unsupervised, therefore, their safety is their supervisor’s responsibility.

The seating must remain locked at all times when not in use. When getting in and out the seating must be secured with a pawl. Before swinging, please make sure that no one/nothing is close to the seating and under the seats, especially below, or close to the movement mechanism or any other moving part of the seating. The load bearing capacity of each bench for a 4-seats and 6-seats seating is up to 225kg and 300kg respectively. Distribute the load evenly and do not put too much load on one side only.

When swinging, especially when hitting the pawl, objects on the table may topple, drinks may be spilt, etc. So, please, be very careful, mainly when swinging with hot food and drink, and sharp objects.

Do not use this product when damaged, broken or incomplete, and contact us on the phone number stated in the header. Any handling that is inconsistent with the instructions for use is absolutely forbidden, because it can result in serious injury to the person or irrepairable damage to the product and only you will be held responsible.

The garden seating is intended for use on a horizontal surface.

The warranty is 2 years on purchase of the product. The warranty does not include damage caused to the product as a result of incosistence with the instructions of use, prohibited handling or malicious mechanical damage.